Intan Technologies, LLC: low-noise amplifier microchips for electrophysiology, EKG, EMG, EEG, ECoG, and neural recording headstages and bio instrumentation

RHS2000 Stim SPI cable adapter board
RHS2000 Stim SPI cable adapter board connected to a Stim SPI interface cable.

Main Documentation:

Stim SPI interface cable/connector specification

Application note: Adapting Stim SPI cables to a commutator

Supporting Documents:

Pricing information


RHS2000 Stim SPI cable adapter boardClose-up view of RHS2000 Stim SPI cable adapter board with self-aligning 16-pin polarized nano connector.

RHS2000 Stim SPI Cable Adapter Board


The RHS2000 Stim SPI cable adapter board (Part #M4430) connects to a Stim SPI interface cable and brings out all 16 power and data wires to 0.1" pitch solder holes for easy access. This board may be used to interface Stim SPI interface cables with prototype devices. It may also be used to connect Stim SPI signals to a commutator, as described in the RHS2000 Application Note: Adapting Stim SPI Cables to a Commutator.

The board uses an Omnetics PZN-16 polarized nano connector, and may be directly connected to Stim SPI interface cables, stim/record headstages, or SPI ports on the Intan Stimulation/Recording Controller.

Technical details on the Stim SPI cables and connectors may be found in the Stim SPI interface cable/connector specification.


 

© 2010-2017 Intan Technologies, LLC. All Rights Reserved