Downloads

Software

RHX Data Acquisition Software

The universal RHX software works with RHD USB interface boards, RHD recording controllers, and RHS stim/recording controllers. The installer will set up all necessary drivers and other dependencies.

RHD/RHS File Utilities

RHD Electroplating Board

The following software is for use with the RHD electroplating board and 128-channel headstage only.

  • Electroplating GUI
    (Version 1.03, November 4, 2021)
    • Windows installer
    • Mac disk image
      Note: A macOS security feature may prevent you from running the application. To bypass this, right-click (or Ctrl+click) the file and select Open, then agree to Open at the warning message.

Legacy Software

Drivers

  • USB drivers for Windows (7, 8, 10), Mac, and Linux
    These drivers should be installed before attaching Intan hardware to a computer. If you later receive an error message from our software saying 'Opal Kelly USB drivers not installed' you may need to install the Microsoft Visual C++ 2010 Redistributable Package.

Windows Installation Packages

RHS Stim/Recording Controller

  • Stim/Recording Controller software
    (Version 1.07, July 6, 2020)

    Note: This software can be run without a Stim/Recording Controller; it will generate synthetic neural data for demonstration purposes if no Intan hardware is connected.

RHD Recording Controller

The following software is for use with the 512ch and 1024ch Recording Controllers. This software does not work with the RHD USB interface board.

  • Recording Controller software
    (Version 2.08, July 6, 2020)

    Note: This software can be run without a Recording Controller; it will generate synthetic neural data for demonstration purposes if no Intan hardware is connected.

RHD USB Interface Board

The following software is for use with the RHD USB Interface Board. This software does not work with the 512ch and 1024ch Recording Controllers.

  • USB Interface Board software
    (Version 1.5.4, July 6, 2020)

    Note: This software can be run without a RHD USB Interface Board; it will generate synthetic neural data for demonstration purposes if no Intan hardware is connected.

Source Code

RHX Data Acquisition Software

RHD/RHS File Utilities

RHS Stim/Recording Controller

RHD Recording Controller

The following software is for use with the 512ch and 1024ch Recording Controllers.

RHD USB Interface Board

The following software is for use with the RHD USB Interface Board.

RHD Electroplating Board

The following software is for use with the RHD electroplating board and 128-channel headstage.

  • Electroplating GUI
    (Version 1.03, November 4, 2021)
    • C++/Qt source code available on GitHub.

MCU Firmware

RHD STM32 Firmware Framework

Intan has developed open-source C code written for the STM32U5 microcontroller family to facilitate control of an Intan RHD2216 or RHD2132 chip over SPI.

All example code was developed on the commercially-available NUCLEO-U5A5ZJ-Q development board, which is available from many electronics distributors. Intan Technologies does not sell any MCU development boards.

Design Resources